- Place of Origin: Guangdong, China (Mainland)
- Brand Name: ZHIYUAN
- Model Number: EasyCortex M3-1300
Packaging & Delivery
|Delivery Detail:||3-5 working days|
SpecificationsEasyCortx M3-1700 On board Emluator On chip HID and USB mass storage driver 32KB on chip FLASH,support ISP 8KB SRAM
EasyCortex M3-1300 development kit is based on NXP LPC1300 CPU,Cortex-M3 core.
EasyCortex M3-1300 is a high performance,low cost full function development kit,shipped with full example code and documents.this development kit is suitable for education,graduation design and electronic competition.
EasyCortex M3-1300 development kit use LPC1343 from NXP as the core controller.
LPC1343 used Cortex-M3 Rev2 core,support Full speed USB2.0 device,LPC1343 internal ROM integrated a HID and MSC low level driver,this make USB develop easy like COM port.
Thus,LPC1300 is pin to pin compatible with LPC1100,it make porting easy and convenience.
EasyCortex M3-1300 development kit included an on board USB emulator, support USB 2.0 Device, included isolation RS-485 interface etc. EasyCortex M3-1300 development kit provide many free commerce software package and development document,speedup product developing.
- CPU: LPC1343,support LPC1313 and LPC1100 series
- CPU running @72MHz
- On chip HID and USB mass storage driver
- integrated NVIC
- 32KB on chip FLASH,support ISP and IAP
- 8KB SRAM,can be accessing from instruction bus,system bus,data bus by CPU
- serial wire debug and serial wire trace port
- three reduce power modes: sleep,deep-sleep,and deep power-down
- Brownout detect with four separate thresholds for interrupt and one threshold for forced reset
- on chip reset circuit
- on chip SysTick,easy for operating system porting
- 3.3V single power supply(2.0V-3.6V)
- operating temperature: -40°C - 85°C
- USB Device,with on chip PHY,support USB 2.0 protocol
- one UART with fractional baud rate generator,internal FIFO and RS-485/EIA-485 support,and modem control
- one isolation RS-485 transceiver
- one SSP controller,with FIFO
- one enhanced I2C interface
- 42 high speed GPIO
- 10 bit ADC,400KHz
- 2 32bit T/C and 2 16bit T/C,4 cap input and 13 compare output
- WDT,the clock source can be choose from RC oscillator,WDT oscillator,CPU clock
- USB software package with source code and driver program and development document
- UART driver and development document
- I2C driver and development document
- IAP example
- AD sample example
- interrupt controller example
- PWM example
- Timer example
- SSP example
- GPIO example
|Buyer||Product Name||Price||Quantity||Order Time(GMT+8)|